The manufacturer of metal buttons for blazers tells you that the five-claw buttons on the market are usually stamped from brass tapes with wear resistance, good performance, strong corrosion resistance and excellent elastic properties. The locking, opening and closing functions of the claw buckle policy. So what needs to be paid attention to when binding the five-claw buckle, let's take a look at it.

1. The manufacturer of metal buttons for blazers tells you that when making a mold with matching requirements, the matching of the outer circle and the inner hole should be moderately tight and easy to install and take off, otherwise the fastener will be force-bound and cause geometric The deformation of the shape will also cause the opening and closing to be unsuitable, which will cause the clothes to fall off and even pull the clothes out.
2. The manufacturer of metal buttons for blazers tells you to process the corresponding shape of the concave and convex mold according to the geometric shape of the fastener, so as to avoid the shape deformation and damage of the fastener, which will cause loosening, fall off and affect the appearance.
3. The thickness of the fabric should be uniform, too thin or too thick fabrics are prone to quality problems when binding. The manufacturer of metal buttons for blazers tells you that you should pay special attention to the fact that the thread seam cannot be bound, because the density, hardness and thickness of the fabric on the thread seam will increase after sewing, and the binding will easily deform the fastener.
4. Metal buttons for blazers manufacturers tell you that according to the characteristics of different fabrics, a reasonable selection of fastener types can reduce or even avoid quality problems during binding and use.